Electronic Effects
By connecting 220 Volt lamps to the outputs, you get an irregular flickering light. Useful for feeding fiber optic stars or 220 Volt lamps to reproduce the fire effect. Cannot be used in fading.
Mini adjustable led spot complete with power supply, equipped with adjustable joint (for cribs). Technical characteristics: Mini spot 1 W 25° warm white light 2700K and dimension 19,6x39,7 mm.
Nebulizer to recreate a fog effect in your crib. To operate just immerse the nebulizer under 5-6 cm of water and connect it to a 220v power outlet. The product is equipped with a transformer, the length of the cable from the sprayer to the transformer is 1.75 cm, while the cable of the transformer is 1.80cm. The water consumption is about 80ml per hour, the duration may vary if used with effects that reproduce the day and night so you can adjust its ignition
Multispot 3 is a support consisting of 3 adjustable LEDs for cribs and \'suitable for complex lighting contexts where it can solve problems of fixing and space. Each spot is fixed to the base and equipped with a swivel joint. 3 spot x 1W 25° cold white light 2700K. Single spot dimensions: 54x41x247 mm. Power supply included.
Control unit kit consisting of power supply for 4 yellow flickering fire led. The control unit is composed by 2 led of 3mm and 2 led of 5mm diameter. The cable of the led is 2 Mt long.
Control unit kit composed of power supply for 4 flickering red fire led. The control unit is composed by 2 led of 3mm and 2 led of 5mm diameter. The cable of the led is 2 Mt long.
Multispot 3 is a support consisting of 3 adjustable LEDs for cribs and \'suitable for complex lighting contexts where it can solve problems of fixing and space. Each spot is fixed to the base and equipped with a swivel joint. 3 spot x 1W 25° warm white light 2700K. Single spot dimensions: 54x41x247 mm. Power supply included.
Control unit that recreates the lightning effect 300w. The device must be connected in a "sicro" socket(ATTENTION: it must not be connected to a socket with fading). You can connect in the 2 outputs filament lamps 220V and a maximum power of 300w. The outputs are independent of each other and the rapid and random succession of flashes, in several areas, perfectly simulates reality. The duration of the effect can be adjusted manually via the trimmer. Lamps attack E27.
By connecting 220 Volt lamps to the outputs, you get an irregular flickering light. Useful for feeding fiber optic stars or 220 Volt lamps to reproduce the fire effect. Cannot be used in fading.
Mini adjustable led spot complete with power supply, equipped with adjustable joint (for cribs). Technical characteristics: Mini spot 1 W 25° warm white light 2700K and dimension 19,6x39,7 mm.
Nebulizer to recreate a fog effect in your crib. To operate just immerse the nebulizer under 5-6 cm of water and connect it to a 220v power outlet. The product is equipped with a transformer, the length of the cable from the sprayer to the transformer is 1.75 cm, while the cable of the transformer is 1.80cm. The water consumption is about 80ml per hour, the duration may vary if used with effects that reproduce the day and night so you can adjust its ignition
Multispot 3 is a support consisting of 3 adjustable LEDs for cribs and \'suitable for complex lighting contexts where it can solve problems of fixing and space. Each spot is fixed to the base and equipped with a swivel joint. 3 spot x 1W 25° cold white light 2700K. Single spot dimensions: 54x41x247 mm. Power supply included.
Control unit kit consisting of power supply for 4 yellow flickering fire led. The control unit is composed by 2 led of 3mm and 2 led of 5mm diameter. The cable of the led is 2 Mt long.
Control unit kit composed of power supply for 4 flickering red fire led. The control unit is composed by 2 led of 3mm and 2 led of 5mm diameter. The cable of the led is 2 Mt long.
Multispot 3 is a support consisting of 3 adjustable LEDs for cribs and \'suitable for complex lighting contexts where it can solve problems of fixing and space. Each spot is fixed to the base and equipped with a swivel joint. 3 spot x 1W 25° warm white light 2700K. Single spot dimensions: 54x41x247 mm. Power supply included.
Control unit that recreates the lightning effect 300w. The device must be connected in a "sicro" socket(ATTENTION: it must not be connected to a socket with fading). You can connect in the 2 outputs filament lamps 220V and a maximum power of 300w. The outputs are independent of each other and the rapid and random succession of flashes, in several areas, perfectly simulates reality. The duration of the effect can be adjusted manually via the trimmer. Lamps attack E27.
English
Italiano
Français
Español
Deutsch
